Building a new home in Craigieburn VIC

Craigieburn is no longer a frontier suburb. Aston has sold out, Highlands is well advanced and Aitken Hill is still in planning, so new work here is the later stages of existing estates and infill rather than a fresh release front. The findings we record on those builds are consistent: bracing cut through by a following trade, vapour barrier missing in sections, floor joists short of fixings. All of it is cheap to correct at the right stage and permanent afterwards.

Highlands is Stockland's estate and the largest established release in the suburb.

Montview sits at 1300 to 1320 Mickleham Road with roughly 475 lots.

Aitken Hill, at 20 Dunhelen Lane, is marked in planning at around 1,156 lots.

Cut bracing is the single most valuable thing a lock-up inspection finds here.

Pass us the engineering drawings and tie down schedule, and each Craigieburn frame is checked to your own lot.

More about Craigieburn

Written by our local inspection team from work carried out in Craigieburn. Licensed building practitioners.

Guides for Craigieburn owners and buyers

2 March 2026 · 7 min read

The brace that was cut to fit a duct

A structural element, removed by somebody who needed the space.

19 March 2026 · 6 min read

Finding the vapour barrier gap far too late

Recorded at frame stage, weeks after the pour.

1 April 2026 · 5 min read

Uncapped pipes and the blockage nobody expects

Two minutes of work, deferred until it becomes a plumber's callout.

Building a new home in Craigieburn VIC: common questions

How many stages are worth booking?

Slab, frame and pre-handover as a minimum. Add lock-up in Craigieburn specifically, because that is the stage where cut bracing gets found and it is the one item that never resurfaces later.

Can the builder refuse my inspector?

No standard Victorian domestic building contract gives them that right, and it is your property. Supervisors across Highlands and Montview deal with independent inspectors as a matter of routine.

How far in advance is best to call?

A day or two works and more is better. The exception is the slab, where we need to know as soon as a pour date exists rather than once it is locked in.